Поиск по:www.apo.nmsu.edu -
Поискать по всем серверам
На этой странице приведены все страницы сервера www.apo.nmsu.edu ,которые мы индексируем. Показаны документы 1101 - 1120 из 2817.
Упорядочить по:
URL
|
дате изменения
1101. TUI:TUI Menu
Information about items in the TUI menu. Connect : connect to the hub. ... Permissions : show permissions for each program. ... Python : open a window that allows you to execute Python commands, including open and run files of Python code. Users : show users. Preferences : open a preferences editor. ... Save Window Positions: save the position and size of each window and whether it is open or closed (if closed, save the position and size from when it was last open). ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/TUIMenu/index.html -- 2.9 Кб -- 05.09.2014
Похожие документы
Похожие документы
1102. TUI:Telescope:Coordinate Systems
The TCC supports the following coordinate systems: . ICRS: the current RA/Dec standard. The default date of observation is J2000. ICRS is FK5 J2000 (for all practical purposes) but has no date of equinox . ... The date specifies both the date of equinox (usually J2000) and the date of observation . ... The date specifies both the date of equinox and date of observation . ... Warning: the following coordinate systems are rarely used (except Mount for parking the telescope). ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/CoordSys.html -- 4.0 Кб -- 05.09.2014
Похожие документы
Похожие документы
1103. TUI:Telescope
The focal plane window shows the orientation of the sky and axes relative to the focal plane, and also (via the outer spiral) the wrap of the instrument rotator. ... The coordinate frames are shown with respect to the CCD; i.e. they show how things look on your image (unless your image viewing software introduces a flip). ... All axes will either be right handed or left handed, depending on how many mirrors are in the light path and which corner of the CCD is read out. ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/FocalPlaneWin.html -- 2.1 Кб -- 05.09.2014
Похожие документы
Похожие документы
1104. TUI:Telescope:Mirror Status window
. Show the mirror orientation and mount. The top panel shows measured orientation (using encoders) and desired orientation for each mirror. The bottom panel shows measured encoder length, desired encoder length (based on desired orientation) and commanded actuator length for each mirror.
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/MirrorStatusWin.html -- 1.5 Кб -- 05.09.2014
Похожие документы
Похожие документы
1105. TUI:Telescope:Nudger window
This widget allows you to make small offsets using a graphical nudger. ... Max offset : the maximum offset you can command using the graphical nudger to the right. Offset amount : the amount of the current or most recent offset. Graphical nudger : command the offset using the square region to the right: . ... Drag the mouse to change the amount. ... To cancel (without moving the telescope) drag the mouse outside the square before releasing the mouse button. ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/NudgerWin.html -- 2.4 Кб -- 05.09.2014
Похожие документы
Похожие документы
1106. TUI:Telescope:Offset Types
TUI supports the following offsets: . Object Arc offset by a given amount on the sky (i.e. along the arc of a great circle). ... Arc offsets are useful for moving a different portion of your object or a different nearby object onto the boresight . ... Object Arc XY this is identical to an Object offset except that it has been rotated to align along the instrument x-y axes. ... This is just like the Calibration XY offset, except that it is typically cleared when you slew to a new object. ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/OffsetTypes.html -- 6.3 Кб -- 05.09.2014
Похожие документы
Похожие документы
1107. TUI:Telescope:Offset window
This widget allows you to offset the telescope. ... Offset type : one of "Object Arc", "Object Arc XY" or "Boresight". ... This is motion on the sky or instrument, so don't worry about cos(dec). ... If you want to move that point (e.g. center your object along a different bit of the slit), then use a boresight offset. ... Note that a +X object xy offset will move the sky in the -X direction on the focal plane, because you are centering something in the +X direction on the boresight. ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/OffsetWin.html -- 4.2 Кб -- 05.09.2014
Похожие документы
Похожие документы
1108. TUI:Telescope:Rotation Types
The rotation type specifies the meaning of the rotation angle. Only Object and Horizon are typically used for science (or None if your instrument does not have a rotator). ... Mount is typically used for engineering. ... Mount: rotator angle used by the rotator axis controller. ... For an instrument with a rotator: if you specify a rotation type of None and the rotator is moving then it will be halted at approximately its current position; this feature use used to implement a controlled stop. ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/RotTypes.html -- 3.5 Кб -- 05.09.2014
Похожие документы
Похожие документы
1109. TUI:Telescope:Secondary Focus Window
This widget allows you to adjust the secondary mirror focus. The seconary focus is actually an offset to the secondary mirror piston computed by the TCC (as it tries to compensate for changing temperature and altitude). ... Set... : set a new absolute secondary focus. ... XX and + XX buttons: offset the secondary focus by the amount shown. The mirror is moved as soon as you release the button. Increment Menu (25/50/100) : set the increment shown on the - XX and + XX buttons. ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/SecFocusWin.html -- 2.2 Кб -- 05.09.2014
Похожие документы
Похожие документы
1110. TUI:Telescope:Sky Window
The sky window shows the position of the telescope and the user's catalog objects on the sky (the inner az/alt polar grid) and also the position of the azimuth axis along its wrap (the outer spiral). ... The target position of the telescope (where it will end up after the slew) is shown as a plus. ... The potential position of the telescope (the position in the Slew window ) is shown as an X. Objects in the users's catalog (those with alt>0) are shown as dots. ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/SkyWin.html -- 2.4 Кб -- 05.09.2014
Похожие документы
Похожие документы
1111. TUI:Telescope:Slew Window:Options:Axis Wrap
Allows you to specify a desired wrap for the azimuth axis and the instrument rotator. ... If the axis is being driven in mount coordinates then your wrap preference will be recorded, but ignored (for mount coordinates you specify exactly the position you want; a different wrap is never chosen). The wrap preferences are: . Nearest pick the position nearest the current position . ... Positive pick the larger angle . Middle pick the position nearest the center of the allowed range of motion . ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/SlewWin/AxisWrapPanel.html -- 2.3 Кб -- 05.09.2014
Похожие документы
Похожие документы
1112. TUI:Telescope:Slew Window:Options:Calibrate
This panel adds a pointing error measuring (and possibly correcting) sequence to your slew. ... Log Error measure the pointing error and log it to the current pointing error file (which must already have been opened with the TCC command PTERR OPEN=filename ; this command is not presently supported by TUI, but you can enter manually at the log window; be sure to also issue PTERR CLOSE when you are done logging data). ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/SlewWin/CalibratePanel.html -- 3.3 Кб -- 05.09.2014
Похожие документы
Похожие документы
1113. TUI:Telescope:Slew Window:Options:Drift Scan
Allows you to specify a drift scan: motion at a constant velocity along a great circle. ... The path starts at the new object position (though the telescope actually intersects the path later, see Subtleties ). ... Note that the units are always /sec for both axes. ... The velocity along the path is 0.01 /sec. ... The path is assumed to start when you hit the Slew button (more precisely, when the TCC parses the command). However, it takes the telescope awhile to slew to meet the specified path. ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/SlewWin/DriftScanPanel.html -- 4.9 Кб -- 05.09.2014
Похожие документы
Похожие документы
1114. TUI:Telescope:Slew Window:Options:Keep Offsets
Allows you to specify which offsets should be retained and which offsets should be zeroed for a slew. Checked offsets are retained and unchecked offsets are zeroed. ... Arc : the arc offset . ... Warning: like all option panels, this one must be visible for its settings to have any effect. If you close (hide) it then default values will be used. Defaults: restores this panel to its default values (the same values that will be used if you slew with this panel closed). ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/SlewWin/KeepOffsetsPanel.html -- 2.2 Кб -- 05.09.2014
Похожие документы
Похожие документы
1115. TUI:Telescope:Slew Window:Options:Mag PM
Allows you to specify the magnitude, proper motion, etc. of the object. ... Mag : magnitude of object. ... Obs Date : date of observation; used for correcting proper motion and radial velocity. ... PM RA/Long : proper motion in RA or Longitude, in arcsec/century. ... Warning: like all option panels, this one must be visible for its settings to have any effect. ... Defaults: restores this panel to its default values (the same values that will be used if you slew with this panel closed). ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/SlewWin/MagPMPanel.html -- 2.9 Кб -- 05.09.2014
Похожие документы
Похожие документы
1116. TUI:Telescope:Slew Window
This window lets you tell the telescope where to go. ... Options : these checkboxes open or close panels of options. A given panel must be open for its settings to have any affect ; If you change an option and then close the panel, the change will have no effect. ... Command buttons: . ... Selecting an object restores its settings; the telescope doesn't slew until you press the Slew button. ... Select an entry to restore its settings; the telescope doesn't slew until you press the Slew button. ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/SlewWin/index.html -- 4.3 Кб -- 05.09.2014
Похожие документы
Похожие документы
1117. TUI:Telescope:StatusWin
The Status window shows the status of the telescope and (on unix and Windows) contains TUI's menus. ... The top panel shows user-specified information about the current target and also the progress of slews: . Name : object name . Obj Pos1/2 (e.g. RA/Dec): net object position. including object and arc offsets. ... Object Arc Off: the current object arc offset . Object Arc Off X,Y: the current object arc offset rotated to instrument xy coordinates (this may vary if the field rotates). ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/StatusWin.html -- 3.9 Кб -- 05.09.2014
Похожие документы
Похожие документы
1118. TUI:Telescope:User Catalogs
User catalogs allow you enter positions for your objects into a file, to save time during an observing run. ... Before diving into the details, here is an example: # default coordinate system and object # (these are the standard defaults, so if you like them you can omit this line) CSys=FK5; Date =2000; RotType= Object ; RotAng=0 # some random objects # Name Pos1 (e.g. RA) Pos2 (e.g. Dec) Options in keyword-value format NGC6543 rot 90 ... Object Data . Defaults . Catalog Options . ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/UserCatalogs.html -- 10.3 Кб -- 05.09.2014
Похожие документы
Похожие документы
1119. TUI:Telescope
This page provides information about the various telescope-related widgets, plus general topics such as user catalogs, coordinate systems and rotation types. TUI talks to the telescope via the TCC (Telescope Control Computer). Most of the telescope-related windows are available via the TCC menu of the main Status window. TCC Windows (all are items in the TCC menu except for the Status window): . ... Mirror Status Window . Nudger Window . ... Status Window . Other Information: . ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Telescope/index.html -- 2.4 Кб -- 05.09.2014
Похожие документы
Похожие документы
1120. TUI:Tidbits:Entering Sexagesimal Positions
Many entry fields permit sexagesimal entry (h:m:s.s or :':"). ... Sexagesimal entry is flexible in that you can specify one to three fields, as you desire. ... Position entry widgets assume that a single field is decimal hours or degrees (h.h or . ... You may specify one to three fields: . ... Note: sexagesimal offsets and durations are entered in the same fashion, but a single field is decimal arc-seconds or seconds ('.' or s.s) and two fields are (arc) minutes and seconds (':"." or m:s.s). ...
[
Сохраненная копия
]
Ссылки http://www.apo.nmsu.edu/35m_operations/TUI/Tidbits/AbsSexagesimal.html -- 3.2 Кб -- 05.09.2014
Похожие документы
Похожие документы