Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.parallel.ru/sites/default/files/ftp/cluster/ssh-clients/mindterm/docs/Settings.txt Дата изменения: Wed Nov 2 11:53:58 2011 Дата индексирования: Tue Oct 2 04:33:20 2012 Кодировка:

Mindterm Settings

This document lists the different configuration options one may set to
configure MindTerm. Settings can be specified on the command-line,
stored in a per host file (~/mindterm/HOST.mtp) or specified in the
html code used to launch the applet.


Common connection settings

protocol Preferred protocol (auto/ssh1/ssh2)
server Name of server to connect to
port Port on server to connect to
real-server Real address of sshd if it is behind a firewall
local-bind Default local address to bind to for forwards
username Username to login as
password Password for normal authentication
(only saved if save passwords checked)
passphrase Passphrase for publickey keypair file
(only saved if save passwords checked)
proxy-type Type of proxy server to connect through
(none/http/socks4/socks5)
proxy-host Name of proxy server to connect through
proxy-port Port on proxy server to connect through
proxy-user Username if authentication on proxy server
proxy-password Password if authentication on proxy server
ssh1-cipher Name of block cipher to use in ssh1
(blowfish-cbc/3des-cbc/idea-cbc)
auth-method Method of authentication, either single or
comma-separated list (password/publickey/tis/
secureid/cryptocard/keyboard-interactive)
private-key Name of file containing private key publickey authentication
display Local X11 display definition (i.e. :)
compression Compression Level (0 means none, 1=fast, 9=slow/best)
x11-forward Indicates whether X11 display is forwarded or not
x11-display Local display to forward
force-pty Indicates whether to allocate a pty or not
sftpbridge-host Interface to listen on in ftp to sftp bridge
(empty if disabled)
sftpbridge-port Port to listen on in ftp to sftp bridge
strict-hostid Strict host key check, can only connect to known hosts
mtu Max packet size
key-timing-noise Add noise when sending passwords to increase security


SSH2 specific settings

kex-algorithms Kex algorithms to use in preferred order
(diffie-hellman-group1-sha1,
diffie-hellman-group-exchange-sha1)
server-host-key-algorithms Host key algorithms to accept in preferred order
(ssh-rsa, ssh-dss)
enc-algorithms-cli2srv Encryption algorithms client to server
enc-algorithms-srv2cli Encryption algorithms server to client
mac-algorithms-cli2srv Mac algorithms client to server
mac-algorithms-srv2cli Mac algorithms server to client
comp-algorithms-cli2srv Compression algorithms client to server
(none, zlib)
comp-algorithms-srv2cli Compression algorithms server to client
(none, zlib)
package-version Package version to send to server in
protocol version exchange
alive Connection keep-alive interval in seconds
(0 means no keepalive packets are sent)
filelist-remote-command Remote command to list files

supported ciphers:
aes128-cbc, blowfish-cbc, twofish128-cbc, aes192-cbc, aes256-cbc,
twofish-cbc, cast128-cbc, 3des-cbc, idea-cbc, arcfour

supported macs:
hmac-md5, hmac-sha1, hmac-sha1-96, hmac-md5-96, hmac-ripemd160



Terminal window settings

rev-video Reverse video in terminal
autowrap Auto wrapping of line if output reaches edge of window
rev-autowrap Reverse autowrap when going off left edge of window
insert-mode Toggles insert mode
auto-linefeed Do auto-linefeed
repos-input Reposition scroll-area to bottom on keyboard input
repos-output Reposition scroll-area to bottom on output to screen
visible-cursor Toggles if cursor is visible or not
local-echo Do local echo
visual-bell Toggles if audible or visual bell will be used
map-ctrl-space Map + to (e.g. for emacs)
80x132-toggle Toggle 80/132 columns
80x132-enable Enable 80/132 toggling
local-pgkeys Use PgUp, PgDn, Home, End keys for local scroll or escape them
copy-crnl Put instead of at end of lines in copy/paste
ascii-line Use ASCII Line-draw-characters instead of drawing
copy-select Copy directly on mouse-selection
font-name Name of font to use in terminal
font-size Size of font to use in terminal
geometry Geometry of terminal ('x')
term-type Name of terminal to emulate
(xterm, linux, scoansi, att6386, sun, aixterm, vt220, vt100,
ansi, vt52, xterm-color, linux-lat, at386, vt320, vt102)
save-lines Number of lines to save in scrollback buffer
scrollbar Scrollbar position (none/left/right)
bg-color Background color ( or ',,')
fg-color Foreground color ( or ',,')
cursor-color Cursor color ( or ',,')
(name of colors are: black, red, green, yellow, blue, magenta,
cyan, white, i_black, i_red, i_green, i_yellow,
i_blue, i_magenta, i_cyan, i_white)
resize-gravity Resize gravity, fixpoint of screen when resizing (top/bottom)
backspace-send Character to send on BACKSPACE (BS/DEL)
delete-send Character to send on DELETE (BS/DEL)
select-delim Delimiter characters for click-selection ("")
paste-button Mouse button for paste, (shift+left/middle/right)
input-charset Character set to assume input is in. Currently the
only supported name here is 'vga'. The default value
is 'none' which means use the system default.
line-space-delta Number of pixels to modify the line spacing with.


SFTP Module settings

module.sftp.cwd-local Local start directory
module.sftp.cwd-remote Remote start directory



SCP Module settings

module.scp.cwd-local Local start directory
module.scp.cwd-remote Remote start directory