Документ взят из кэша поисковой машины. Адрес оригинального документа : http://neptun.sai.msu.ru/manual/mod/mod_include.html
Дата изменения: Thu May 20 13:01:38 2004
Дата индексирования: Mon Oct 1 20:05:21 2012
Кодировка:
Apache module mod_include
[APACHE DOCUMENTATION]

Apache HTTP Server Version 1.3

Module mod_include

This module provides for documents with Server Side Includes (SSI).

Status: Base
Source File: mod_include.c
Module Identifier: includes_module

Summary

This module provides a handler which will process files before they are sent to the client. The processing is controlled by specially formated SGML comments, referred to as elements. These elements allow conditional text, the inclusion other files or programs, as well as the setting and printing of environment variables.

For an introduction to this topic, we also provide a tutorial on Server Side Includes.

Directives

See also: Options and AddHandler.

Enabling Server-Side Includes

Any document with handler of "server-parsed" will be parsed by this module, if the Includes option is set. If documents containing server-side include directives are given the extension .shtml, the following directives will make Apache parse them and assign the resulting document the mime type of text/html:
AddType text/html .shtml
AddHandler server-parsed .shtml
The following directive must be given for the directories containing the shtml files (typically in a <Directory> section, but this directive is also valid .htaccess files if AllowOverride Options is set):
Options +Includes
Alternatively the XBitHack directive can be used to parse normal (text/html) files, based on file permissions.

For backwards compatibility, documents with mime type text/x-server-parsed-html or text/x-server-parsed-html3 will also be parsed (and the resulting output given the mime type text/html).

Basic Elements

The document is parsed as an HTML document, with special commands embedded as SGML comments. A command has the syntax:
<!--#element attribute=value attribute=value ... -->
The value will often be enclosed in double quotes; many commands only allow a single attribute-value pair. Note that the comment terminator (-->) should be preceded by whitespace to ensure that it isn't considered part of an SSI token. Note that the leading <!--# is one token and may not contain any whitespaces.

The allowed elements are:

config
This command controls various aspects of the parsing. The valid attributes are:
errmsg
The value is a message that is sent back to the client if an error occurs whilst parsing the document.
sizefmt
The value sets the format to be used which displaying the size of a file. Valid values are bytes for a count in bytes, or abbrev for a count in Kb or Mb as appropriate.
timefmt
The value is a string to be used by the strftime(3) library routine when printing dates.
echo
This command prints one of the include variables, defined below. If the variable is unset, it is printed as (none). Any dates printed are subject to the currently configured timefmt. Attributes:
var
The value is the name of the variable to print.
encoding
Specifies how Apache should encode special characters contained in the variable before outputting them. If set to "none", no encoding will be done. If set to "url", then URL encoding (also known as %-encoding; this is appropriate for use within URLs in links, etc.) will be performed. At the start of an echo element, the default is set to "entity", resulting in entity encoding (which is appropriate in the context of a block-level HTML element, eg. a paragraph of text). This can be changed by adding an encoding attribute, which will remain in effect until the next encoding attribute is encountered or the element ends, whichever comes first. Note that the encoding attribute must precede the corresponding var attribute to be effective, and that only special characters as defined in the ISO-8859-1 character encoding will be encoded. This encoding process may not have the desired result if a different character encoding is in use. Apache 1.3.12 and above; previous versions do no encoding.
exec
The exec command executes a given shell command or CGI script. The IncludesNOEXEC Option disables this command completely. The valid attributes are:
cgi
The value specifies a (%-encoded) URL relative path to the CGI script. If the path does not begin with a (/), then it is taken to be relative to the current document. The document referenced by this path is invoked as a CGI script, even if the server would not normally recognize it as such. However, the directory containing the script must be enabled for CGI scripts (with ScriptAlias or the ExecCGI Option).

The CGI script is given the PATH_INFO and query string (QUERY_STRING) of the original request from the client; these cannot be specified in the URL path. The include variables will be available to the script in addition to the standard CGI environment.

For example:

<!--#exec cgi="/cgi-bin/example.cgi" -->

If the script returns a Location: header instead of output, then this will be translated into an HTML anchor.

The include virtual element should be used in preference to exec cgi. In particular, if you need to pass additional arguments to a CGI program, using the query string, this cannot be done with exec cgi, but can be done with include virtual, as shown here:

<!--#include virtual="/cgi-bin/example.cgi?argument=value" -->
cmd

The server will execute the given string using /bin/sh. The include variables are available to the command, in addition to the usual set of CGI variables.

The use of #include virtual is almost always prefered to using either #exec cgi or #exec cmd. The former (#include virtual) used the standard Apache sub-request mechanism to include files or scripts. It is much better tested and maintained.

In addition, on some platforms, like Win32, and on unix when using suexec, you cannot pass arguments to a command in an exec directive, or otherwise include spaces in the command. Thus, while the following will work under a non-suexec configuration on unix, it will not produce the desired result under Win32, or when running suexec:

<!--#exec cmd="perl /path/to/perlscript arg1 arg2" -->
fsize
This command prints the size of the specified file, subject to the sizefmt format specification. Attributes:
file
The value is a path relative to the directory containing the current document being parsed.
virtual
The value is a (%-encoded) URL-path relative to the current document being parsed. If it does not begin with a slash (/) then it is taken to be relative to the current document.
flastmod
This command prints the last modification date of the specified file, subject to the timefmt format specification. The attributes are the same as for the fsize command.
include
This command inserts the text of another document or file into the parsed file. Any included file is subject to the usual access control. If the directory containing the parsed file has the Option IncludesNOEXEC set, and the including the document would cause a program to be executed, then it will not be included; this prevents the execution of CGI scripts. Otherwise CGI scripts are invoked as normal using the complete URL given in the command, including any query string.

An attribute defines the location of the document; the inclusion is done for each attribute given to the include command. The valid attributes are:

file
The value is a path relative to the directory containing the current document being parsed. It cannot contain ../, nor can it be an absolute path. Therefore, you cannot include files that are outside of the document root, or above the current document in the directory structure. The virtual attribute should always be used in preference to this one.
virtual

The value is a (%-encoded) URL relative to the current document being parsed. The URL cannot contain a scheme or hostname, only a path and an optional query string. If it does not begin with a slash (/) then it is taken to be relative to the current document.

A URL is constructed from the attribute, and the output the server would return if the URL were accessed by the client is included in the parsed output. Thus included files can be nested.

If the specified URL is a CGI program, the program will be executed and its output inserted in place of the directive in the parsed file. You may include a query string in a CGI url:

<!--#include virtual="/cgi-bin/example.cgi?argument=value" -->

include virtual should be used in preference to exec cgi to include the output of CGI programs into an HTML document.

printenv

This prints out a listing of all existing variables and their values. Starting with Apache 1.3.12, special characters are entity encoded (see the echo element for details) before being output. There are no attributes.

For example:

<!--#printenv -->

The printenv element is available only in Apache 1.2 and above.

set
This sets the value of a variable. Attributes:
var
The name of the variable to set.
value
The value to give a variable.

For example: <!--#set var="category" value="help" -->

The set element is available only in Apache 1.2 and above.

Include Variables

In addition to the variables in the standard CGI environment, these are available for the echo command, for if and elif, and to any program invoked by the document.
DATE_GMT
The current date in Greenwich Mean Time.
DATE_LOCAL
The current date in the local time zone.
DOCUMENT_NAME
The filename (excluding directories) of the document requested by the user.
DOCUMENT_URI
The (%-decoded) URL path of the document requested by the user. Note that in the case of nested include files, this is not then URL for the current document.
LAST_MODIFIED
The last modification date of the document requested by the user.
USER_NAME
Contains the owner of the file which included it.

Variable Substitution

Variable substitution is done within quoted strings in most cases where they may reasonably occur as an argument to an SSI directive. This includes the config, exec, flastmod, fsize, include, and set directives, as well as the arguments to conditional operators. You can insert a literal dollar sign into the string using backslash quoting:

    <!--#if expr="$a = \$test" -->

If a variable reference needs to be substituted in the middle of a character sequence that might otherwise be considered a valid identifier in its own right, it can be disambiguated by enclosing the reference in braces, à la shell substitution:

    <!--#set var="Zed" value="${REMOTE_HOST}_${REQUEST_METHOD}" -->

This will result in the Zed variable being set to "X_Y" if REMOTE_HOST is "X" and REQUEST_METHOD is "Y".

EXAMPLE: the below example will print "in foo" if the DOCUMENT_URI is /foo/file.html, "in bar" if it is /bar/file.html and "in neither" otherwise:

    <!--#if expr="\"$DOCUMENT_URI\" = \"/foo/file.html\"" -->
    in foo
    <!--#elif expr="\"$DOCUMENT_URI\" = \"/bar/file.html\"" -->
    in bar
    <!--#else -->
    in neither
    <!--#endif -->

Flow Control Elements

These are available in Apache 1.2 and above. The basic flow control elements are:
    <!--#if expr="test_condition" -->
    <!--#elif expr="test_condition" -->
    <!--#else -->
    <!--#endif -->

The if element works like an if statement in a programming language. The test condition is evaluated and if the result is true, then the text until the next elif, else. or endif element is included in the output stream.

The elif or else statements are be used the put text into the output stream if the original test_condition was false. These elements are optional.

The endif element ends the if element and is required.

test_condition is one of the following:

string
true if string is not empty
string1 = string2
string1 != string2
string1 < string2
string1 <= string2
string1 > string2
string1 >= string2
Compare string1 with string 2. If string2 has the form /string/ then it is compared as a regular expression. Regular expressions have the same syntax as those found in the Unix egrep command.
( test_condition )
true if test_condition is true
! test_condition
true if test_condition is false
test_condition1 && test_condition2
true if both test_condition1 and test_condition2 are true
test_condition1 || test_condition2
true if either test_condition1 or test_condition2 is true

"=" and "!=" bind more tightly than "&&" and "||". "!" binds most tightly. Thus, the following are equivalent:

    <!--#if expr="$a = test1 && $b = test2" -->
    <!--#if expr="($a = test1) && ($b = test2)" -->

Anything that's not recognized as a variable or an operator is treated as a string. Strings can also be quoted: 'string'. Unquoted strings can't contain whitespace (blanks and tabs) because it is used to separate tokens such as variables. If multiple strings are found in a row, they are concatenated using blanks. So,

     string1    string2  results in string1 string2
    'string1    string2' results in string1    string2

Using Server Side Includes for ErrorDocuments

There is a document which describes how to use the features of mod_include to offer internationalized customized server error documents.

XBitHack directive

Syntax: XBitHack on|off|full
Default: XBitHack off
Context: server config, virtual host, directory, .htaccess
Override: Options
Status: Base
Module: mod_include

The XBitHack directives controls the parsing of ordinary html documents. This directive only affects files associated with the MIME type text/html. XBitHack can take on the following values:

off
No special treatment of executable files.
on
Any file that has the user-execute bit set will be treated as a server-parsed html document.
full
As for on but also test the group-execute bit. If it is set, then set the Last-modified date of the returned file to be the last modified time of the file. If it is not set, then no last-modified date is sent. Setting this bit allows clients and proxies to cache the result of the request.

Note: you would not want to use this, for example, when you #include a CGI that produces different output on each hit (or potentially depends on the hit).


Apache HTTP Server Version 1.3

Index Home