Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.spm.genebee.msu.ru/manual/en/node43.html
Дата изменения: Fri Feb 4 20:38:59 2005 Дата индексирования: Mon Oct 1 20:32:58 2012 Кодировка: |
In the client part of the ''FemtoScan`` software package (''FemtoScan`` program, file femtoscan.exe) all scanning parameters can be configured. All commands that control scan process, sample landing/retracting are come from the client program. In principle scanning process does not need an interactive communication with the server. This allow to drive a microscope from the remote computer through a network. SPM menu commands and buttons on a SPM instrument panel are meant to control the microscope. SPM menu can be found at any moment of program work, and SPM instrument panel can be switched on or off -- a tick near a Toolbar SPM menu item is responsible for this.