Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.spm.genebee.msu.ru/manual/en/node52.html
Дата изменения: Fri Feb 4 20:38:59 2005 Дата индексирования: Mon Oct 1 20:35:10 2012 Кодировка: |
When connection with the server is established and all necessary parameters are configured the work can be started. First, check a slider position (this slider can be found in the middle of the Parameters window). This slider shows current position of the piezomanipulator's Z coordinate (that will be represented as a height on the final image). If feedback parameters are set correctly and a tip is not landed on a sample this slider should be in bottom position.